Olivetti d-Copia 45 Operation Manual page 202

Section 7 COPIER MANAGEMENT FUNCTIONS
3
If you want to change the name of that box, first select "Box
name" and then touch the "Change #" key. Enter the new
name as desired.
Inch specifications
Box007
Default menu Setting mode
Box name ABCD_0000101
password (No registrat.)
Default setting - Document Management - Box editting
Metric specifications
BOX 007
Default menu
Box name ABCD_0000101
Password (No register)
Default setting - Document management - Box editting
NOTE
• Refer to "Entering characters" on page 7-72 for information on
entering characters.
4 If you want to change the name of that box, first select
"Password" and then touch the "Change #" key. The
"Password" screen will be displayed.
5 Use the keypad to enter the new password for that box and
then touch the "Close" key. The new password will be
registered and the touch panel will return to the screen in
step 3.
Inch specifications
password
Enter new password.
password
Default setting - Document Management - Box edittings - 077
Metric specifications
Password
Enter new password.
password
Default settund - Document Management - Box editting - 006
NOTES
• The password can be between 1 and 8 digits long.
• If you decide not to register a password for that box, touch the
"Clear" key and then, with nothing entered in the password field,
touch the "Close" key.
7-66
Close
Reset
Box
Change #
Close
Reset
Setting mode
Box
Change #
Back Close
(Enter by #key)
Clear
Back Close
(Enter #-key)
Clear
6
If you want to delete all of the data in that box, select "Reset
Box". A verification screen will be displayed.
7 Touch the "Yes" key or the "No" key, as appropriate.
Inch specifications
007
Box No. :
ABCD_0000101
Box name :
Reset this Box. Do you really want to reset?
Yes
Metric specifications
007
BOX NR. :
ABCD_0000101
Box name :
Reset this Box. Do you really want to reset?
Yes
If you selected "Yes", all the data in the selected box will be
deleted and the touch panel will return to the screen in step
3.
If you selected "No", the touch panel will return to the
screen in step 3 without deleting any data.
8 Touch the "Close" key. The touch panel will return to the
screen in step 2.
9 Touch the "Close" ["Job cancel"] key. The touch panel will
return to the screen in step 1. Touch the "Close" key. The
touch panel will return to the "Default setting" screen.Touch
the "End" key. The touch panel will return to the contents of
the "Basic" tab.
Stop
No
Stop
No