Table of Contents
Advertisement
(2) Accessing the copy management mode settings
Perform the following procedure when you want to access the
screens for each of the various copy management mode settings.
1
With the content of the "Basic" tab displayed, press the [ ]
key. The "Default setting" screen will be displayed.
2
Touch the "Management" key on the right side of the touch
panel.
Inch specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine
Document
default
Management
Metric specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine
Document
default
Management
Section 7 COPIER MANAGEMENT FUNCTIONS
3
4
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Hard Disk
Management
Print
Form
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-31.)
• Refer to the desired procedure(s) explained under "(3) Making copy
management settings" and perform the corresponding setting(s).
Use the keypad to enter the 4-digit management code.
The factory default setting for 45 cpm copiers is "4500" and
for 55 cpm copiers is "5500". If the entered code matched the
registered one, the "Management code menu" screen will be
displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
Touch the key that corresponds to the desired copy
management mode setting.
The screen for that setting will be displayed.
Inch specifications
Management menu
Management code menu
Counter
Print
ID-code
by ID-code
the list
Reg./Del.
# of copy
correct
Counter
Print
clear
Err. PRT.
Default setting
Metric specifications
Management mode
Management code menu
Counter
Print
ID-code
by ID-code
Reg./Del.
the list
# of copy
correct
Print
counter
clear
Err. PRT.
Default setting
Close
Close
Close
c o py
P r i n t e r
Off
Off
On
On
Close
C o py
P r i n t e r
Off
Off
On
On
7-3
Advertisement
Table of Contents
