Table of Contents
Advertisement
Section 4
1. Basic copying procedure
1
1. Warm-up
Turn the main switch ON ( | ). At the end of warm-up, "Ready to copy."
will be displayed.
NOTE
If you set the originals that you want to copy and press the [Start] key
while the copier is still warming up, copying will begin as soon as
warm-up is finished.
2
2. Setting the originals
Set the original(s) that you want to copy in the Document Processor
or on the platen. If you set an original on the platen, place it at the left-
rear corner of the platen and align it with the appropriate original size
indicator lines.
NOTE
Refer to "2. Setting originals" on page 3-6 for more detailed
information on setting originals.
BASIC OPERATION
Ready to copy.
3
1
11x8
/
"
2
Plain
1
8
/
x11"
2
APS
Color
Auto
11x8
1
/
"
Bypass
2
Exposure
Plain
11x8
1
/
"
2
Recycled
Exposure
Basic
User choice
Function
Inch specifications
Ready to copy.
3
Plain
APS
Colour
Bypass
Auto Exp.
Plain
Exposure
Recycled
Mode
Basic
User choice
Function
Metric specifications
3. Selecting the desired functions
Select from among the copier's various modes and functions.
• Enlarging/reducing the copy image (Page 4-5.)
• Interrupt copying (Page 4-9.)
• Making 2-sided copies from various types of originals (Page 5-1.)
• Copying each image of open-faced (books, magazines, etc.) or
2-sided originals onto separate sheets (Page 5-4.)
• Creating a margin on the copies (Page 5-6.)
• Centering the copy image (Page 5-8.)
• Adding a space next to the copy images for making notes
(Page 5-9.)
• Making copies with clean edges (Page 5-11.)
• Fitting the image of either two or four originals onto a single copy
page (Page 5-13.)
• Printing page numbers on the copies (Page 5-16.)
• Overlaying one image over another (Page 5-20.)
• Making booklets from sheet originals (Page 5-22.)
• Making booklets from books (Page 5-25.)
• Automatic sorting of copy sets without the Document Finisher
(Page 5-28.)
• Automatic rotation of the copy image (Page 5-29.)
• Copying different sized originals at the same time (Page 5-30.)
• Adding a front and/or back cover to your copy sets (Page 5-32.)
• Feeding paper as a backing sheet for OHP transparencies
(Page 5-37.)
• Inverting black and white (Page 5-39.)
• Making mirror image copies (Page 5-40.)
• Making a test copy prior to large volume copying (Page 5-41.)
• Making more of the same copies after a copy job is finished
(Page 5-43.)
• Copying a large volume of originals in one operation (Page 5-48.)
• Easily add covers and insert sheets between various sets of
originals in one operation (Page 5-58.)
Paper Size
S
11x8
1
/
"
2
Co
Ori
qua
1 sided
AMS
R1 sided
Re
1 sided
/En
R2 sided
Reduce
2 sided/
/Enlarge
Separation
Program
Paper size
Me
Ima
qua
1-sided
AMS
1-sided
Re
1-sided
En
2-sided
Reduce/
2-sided/
Enlarge
Split
Program
4-1
Advertisement
Table of Contents
