Olivetti d-Copia 45 Operation Manual page 170

Section 7 COPIER MANAGEMENT FUNCTIONS
Default setting
Default drawer[cassette] Sets one drawer[cassette] that will be selected
automatically regardless of the size of paper loaded
in that drawer[cassette].
* It is NOT possible to select the multi-bypass tray
as the default drawer[cassette].
* The "5th paper" key will only be displayed when
the optional Side Feeder, which is only available
for 55 cpm copiers, is installed on your copier.
Cover drawer[cassette] Sets which drawer[cassette] will be used to feed the
cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
* The "5th paper" key will only be displayed when
the optional Side Feeder, which is only available
for 55 cpm copiers, is installed on your copier.
Default magnification Sets whether or not the auto magnification selection
ratio mode will be used to automatically calculate the
appropriate magnification ratio when you select the
size of copy paper.
Auto exposure Adjusts the overall exposure level for the auto
adjustment exposure mode.
Auto exposure Adjusts the overall exposure level for scanning with
adjustment (OCR) OCR (Optical Character Recognition) software when
using the optional scanner functions of this copier.
Manual exposure Adjusts the median exposure value when the
adjustment (text+photo text+photo mode is selected for the image quality.
mode)
Manual exposure Adjusts the median exposure value when the text
adjustment (text mode) mode is selected for the image quality.
Manual exposure Adjusts the median exposure value when the photo
adjustment (photo mode is selected for the image quality.
mode)
Margin width Determines the default value of the location and
width of the margins in the margin mode.
Erased border width Determines the default value for the width of the
border to be erased in the two border erase modes.
7-34
Description Available settings Factory
setting
1st paper 1st paper
2nd paper
3rd paper
4th paper
5th paper
1st paper Bypass
2nd paper
3rd paper
4th paper
5th paper
Bypass
Manual / AMS Manual
-3 – +3 Standard setting
-3 – +3 Standard setting
-3 – +3 Standard setting
-3 – +3 Standard setting
-3 – +3 Standard setting
Inch specification Inch
0 – 3/4 (inches) specification
Metric specification Left: 1/4 (inches)
0 – 18 (mm) Top: 0 (inches)
Metric
specification
Left: 6 (mm)
Top: 0 (mm)
Inch specification Inch
Outside border: specification
0 – 3/4 (inches) Outside border:
Center area: 1/4 (inches)
0 – 1 (inches) Center area:
1/2
1/4 (inches)
Metric specification Metric
Outside border: specification
0 – 18 (mm) Outside border:
Center area: 6 (mm)
0 – 36 (mm) Center area:
6 (mm)
Reference
page
7-44
7-45
7-46
7-47
7-48
7-49
7-50
7-51
7-52
7-53