Olivetti d-Copia 45 Operation Manual page 116

Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
NOTE
Refer to "Entering characters" on page 7-72 for information on
entering characters.
5 Touch the "Select orig. size" ["Select size orig."] key, the
"Select regi. size" key and/or the "Reduce/Enlarge" key,
if you want to perform the corresponding settings.
If you want to access the "Scanning density" key and/or the
"Orig.image quality" ["Image quality"] key to make those
settings, touch the "Quality" key.
If you want to set access the "Border Erase" ["Erase Mode"]
key to make those settings, touch the "Edit" key.
6 Press the [Start] key. Scanning of the document will start.
Once the document has been completely scanned, the touch
panel will return to the screen in step 3.
If you want to register another form, repeat steps 3 through
6.
7 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
2 Checking registered forms and changing form names
Perform the following procedure when you want to verify the name of
a registered form, the size of the original document or the date and
time it was stored in memory, or when you want to print out the
document in order to check it. You can also use this procedure to
change the registered form name.
1 Press the [Document Management] key. The "Document
Management" screen will be displayed.
6-2
2
Touch the "Box Edittig" ["Box Editting"] key under "Form box".
The "Box editting" screen will be displayed.
Inch specifications
Select function.
Document Management
Shared Data Box Synergy Print Box
Document Document Document
reg. printing reg.
Box Box
Edittig Edittig
Metric specifications
Select function.
Document Management
Shared Data Box Synergy Print Box
Document Document Document
registr. printing registr.
Box Box
Editting
Editting
3 Select the form that you want to check and then touch the
"Conf/Crrt. details" ["Check/Rev. details"] key. The "Check/
Correct details" ["Check/revise details"] screen will be
displayed.
Inch specifications
Box editting
Form
11x8 1 / "
Form 005 01/04/19
2
Form 004 11x8 1 / " 01/04/19
2
Form 003 8 1 / x11" 01/04/19
2
Form 002 11x8 1 / " 01/04/19
2
Form 001 11x8 1 / " 01/04/19
2
001/005
Document Management - Form box
Metric specifications
Box editting
Form
Form 007 A4 25/10/01
Form 006 25/10/01
A4
25/10/01
Form 005 A4
25/10/01
Form 004 A4
Form 003 A4 25/10/01
001/007
Document Management - Form box
NOTE
It is possible to change the order of display for the registered forms. To
do so, touch the "Order of indication" key, and then touch the "Arrange
based date" key or the "Arrange based name" key, as appropriate.
25/10/'01 19:20
End
Form box
Form
Document
printing reg.
Box
Edittig
25/10/'01 19:20
End
Form box
Document Form
printing
registr.
Box
Editting
Close
Order of
Up
indication
Conf/Crrt.
details
Down Delete
Close
Order of
Up
indication
Check/Rev.
details
Down
Delete