Olivetti d-Copia 45 Operation Manual page 236

Section 9 TROUBLESHOOTING
Trouble
The copies come out too Is the copier in the auto exposure mode?
dark.
Is the copier in the manual exposure mode?
The copies are dirty. Is the platen or the Document Processor
dirty?
The copy image is skewed. Were the originals set correctly?
Paper jams occur often. Is the copy paper loaded properly in the
drawer[cassette]?
Is the copy paper curled, folded over or
wrinkled?
Is there any jammed paper or loose scraps
of paper remaining inside the copier?
9-18
Checkpoint
In order to adjust the overall exposure level,
perform the "Auto exposure adjustment"
procedure.
Adjust the exposure to the correct level
using the copy exposure adjustment keys.
To adjust the overall exposure, adjust the
exposure for each image quality mode.
Clean the platen and/or the Document
Processor.
When setting originals on the platen, align
them securely with appropriate original size
indicators.
When setting originals in the Document
Processor, align the original insert guides
securely according to the size the originals.
Load the paper properly.
Replace the copy paper with new paper.
Carry out the appropriate procedure to
remove the paper.
Procedure Reference
page
7-47
4-2
7-49
7-50
7-51
10-1
3-7
3-6
3-1
3-1
9-6