Table of Contents
Advertisement
System Menu > [Date/Timer/Energy Saver]
[Date/Timer/Energy Saver]
Menu Transition: [System Menu / Counter] key > [Date/Timer/Energy Saver] Configure date and time settings.
Item
Date/Time
Date Format
Time Zone
Auto Panel Reset
Panel Reset Timer
Low Power Timer
Sleep Rules (models for
*1
Europe)
Set the date and time for the location where you use the machine. If you perform Send
as E-mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00
to 59), Second (00 to 59)
Setting Date and Time (2-12)
NOTE
If you change the date/time while using the trial version of an application, you will no
longer be able to use the application.
Select the display format of year, month, and date. The year is displayed in Western
notation.
Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Set the time difference from GMT. Choose the nearest listed location from the list. If you
select a region that utilizes summer time, configure settings for summer time.
Setting Date and Time (2-12)
If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
Refer to the following for the time until reset.
Panel Reset Timer (8-56)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
NOTE
Low Power Mode (2-22)
Select whether to use the Sleep mode for the following functions individually:
*2
Card Reader
Application
Value: Off, On
NOTE
If the sleep condition is not turned off, the ID card cannot be recognized.
8-56
Description
Advertisement
Table of Contents
