Olivetti d-Copia 45 Operation Manual page 86

Section 5 OTHER CONVENIENT FUNCTIONS
9
Once the first copy set is complete, a screen will be
displayed in order to verify whether or not you want to
continue copying at the present settings, and the copier will
enter a waiting-to-copy state. Check the test copies.
Inch specifications
Check proof copy.
When stopping and retr y press "Cancel" key.
When continue to pr int, press "Star t" key.
O r i g . p a g e
11x8 1 / " 100% 11x8
2
1 sided APS 2 sided
Rear Sort/Staple/Punch
Job130
Metric specifications
Check test copy.
To stop and retr y , press "Cancel" key.
To continue to pr int, press "Star t" key.
O r i g i n a l
A4 100% A4
1-sided APS 2-sided
Rtop/Rear Sort/Staple/Punch
JOB130
If there is no problem with the copies...
Press the [Start] key and copying of the remaining copy
sets will start.
If you want to change the number of copies to be made,
press the [Change Preset] key and enter the actual number
of copies you do want to make.
If there is some problem with the copies...
Touch the "Cancel" ["Job cancel"] key to cancel the copy
job and start the procedure from the beginning.
5-42
Count/Set Output
1 / "
2
Cancel
Change
Preset
Count / set Output
Cancel
Change
Preset