Olivetti d-Copia 45 Operation Manual page 167

3
Touch the "+" key or the "-" key to change the displayed time
difference to the desired setting.
Inch specifications
Time difference
GMT+ 00 : 00
Default setting - Machine default
Metric specifications
Time difference
GMT+ 00 : 00
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5
Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Section 7 COPIER MANAGEMENT FUNCTIONS
Changing the management code
Perform the following procedure to change the management code
used by the copy manager.
Back Close
IMPORTANT!
If you change the management code from its factory default, be sure
to keep some sort of record of the new management code. If, for any
reason, you forget the registered management code, you will need to
contact your service representative.
Back Close
1
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Metric specifications
2 Select "Management code change" ["Change MGMT code
with #"] in the settings list on the left side of the touch panel
and then touch the "Change #" key.
The "Management code change" ["Change MGMT code with
#"] screen will be displayed.
Inch specifications
Metric specifications
Display the "Machine default" screen.
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine Document
default Management
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine Document
default Management
Default setting
Machine default
Default menu Setting mode
Silent mode Off
Date/Time 2001/10/30 14:02
Time difference GMT+08:00
Management code change 4500
Auto shut-off On
Default setting
Default setting
Machine default
Default menu Setting mode
Silent mode Off
Date/Time 30/10/'01 14:02
Time difference GMT+08:00
Change MGMT code with # 4500
Auto shut-off On
Default setting
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Hard Disk
Management
Print
Form
Close
Up
Down
Change #
Close
Up
Down
Change #
7-31