Document Finisher (B) - Olivetti d-Copia 45 Operation Manual

Section 8 OPTIONAL EQUIPMENT
5 Selecting the location of copy ejection
1 Touch the "Function" tab and then touch the "Select of
Output" key. The "Select of Output" screen will be displayed.
Inch specifications
Ready to copy.
Auto
OHP back Proof Copy
Rotation
Orig. set
Eco print Invert
direction
Modify
Select of
Copy Output
Function
Basic User choice
Metric specifications
Ready to copy.
Auto
Test copy
OHP back
Rotation
Orig. set
Eco print Invert
direction
Modify Select of
copy Output
Basic User choice Function
2 Select the desired location for the ejection of finished copies.
Inch specifications
Ready to copy.
Select of Output
Au t o
Tray 3
Tray A
Tray 1 Tray 4
Tray 2 Tray 5
Metric specifications
Ready to copy.
Select of Output
Au t o
Tray 3
Tray A
Tray 1 Tray 4
Tray 2 Tray 5
NOTE
If you select "Auto sel. of output", the copies will be ejected into the
next empty tray.
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
4 Set the originals to be copied.
5 Press the [Start] key.
Scanning of the originals will start.
NOTE
If you do not set the originals in the Document Processor, perform the
appropriate procedure to set all of the originals to be copied.
8-6
Paper size
Set
11x8 1 / "
2
Memo
Pages
Mirror Up
Down
Program
Paper size
Set
Memo
pages
Mirror Up
Down
Program
Paper size
Set
1
11x8 / "
2
Register Back Close
S e l e c t p r o p e r o u t p u t t ray t o avo i d
m i x i n g j o b.
Yo u c a n c o n f i r m o u t p u t t ray w i t h o u t p u t
m a n a g e m e n t .
Paper size
Set
Register Back Close
S e l e c t p r o p e r o u t p u t t ray t o avo i d
j o b m i x i n g .
Yo u c a n c o n f i r m o u t p u t t ray w i t h o u t p u t
m a n a g e m e n t .
6
Once all of the originals have been completely scanned,
touch the "Scanning finished" key. Copying will start and the
finished copies will be ejected in the selected tray.
7 Once copying is completed, removed the finished copy sets
from the corresponding tray(s).
6 Stacking mode
If the number of copies that is ejected onto the TrayB during large
volume copying in the Non-sort mode reaches the acceptable limit
(max: 250), all copies from the 251st onward will be ejected onto the
TrayA.

(3) Document Finisher (B)

The Document Finisher stores a large quantity of copies and can sort
multiple copy sets (Sort/Finished mode), or it can groups copies made
from multiple originals, with all the copies produced from an individual
original stacked together in one set (Group mode), by shifting their
position of ejection. It can also staple the finished copy sets as well.
If the optional Multi Job Tray is installed in your copier as well, you will
also be able to designate finished copies for ejection into the Multi Job
Tray. For more details, refer to the Operation Guide for the Document
Finisher and to "(2) Document Finisher (A)" on page 8-1.