Olivetti d-Copia 45 Operation Manual page 213

7
Once all of the originals have been completely scanned,
touch the "Scanning finished" key. Copying will start and
each set of copies made from each original will be stacked
separately by shifting their position of ejection.
8 Once copying is completed, removed the finished copy sets
from the Finisher.
3 Copying in the Sort-Staple mode
1 Touch the "Function" tab and then touch the "Sort/Finished"
key. The "Sort/Finished" screen will be displayed.
Inch specifications
Ready to copy.
Select 2 sided/ Select
paper
Separation original size
Reduce Auto
Exposure
/Enlarge Selection
Orig.image Margin
Page #
quality Centering
Sort/ Border
Cover
Finished Erase
Function
Basic User choice
Metric specifications
Ready to copy.
Select 2-sided/ Select
paper
Split size orig.
Exposure Reduce/ Auto
Mode Enlarge selection
Image Margin/ Page
quality Image shift numbering
Sort/ Erase Cover
Finished Mode Mode
Function
Basic User choice
2 Touch the "Staple mode" key.
The "Staple mode" screen will be displayed.
Inch specifications
Ready to copy.
Sort/Finished
S o r t S o r t i n g S t a p l e
Staple
Sort:OFF None
mode
One page
Sort:ON
per file
Metric specifications
Ready to copy.
Sort/Finished
S o r t G r o u p S t a p l e
Staple
Sort:Off None
Mode
Output
Sort:On
each page
Paper size
Set
11x8 1 / "
2
Combine
Batch
Up
scanning
Form
Down
Overlay
Booklet
/Stitching
Program
Paper size
Set
Merge copy
Large # of
Up
originals
Form
Down
overlay
Booklet/
Stitching
Program
Paper size
Set
11x8 1 / "
2
Register Back Close
P u n c h
Check direction
Check direction of
original top side.
Punch
mode
Left top
Back Edge
corner
Paper size
Set
Register Back Close
P u n c h
Check direction
Check direction of original.
Punch
Mode
Left top
Back Edge
corner
Section 8 OPTIONAL EQUIPMENT
3
Touch the key that corresponds to the desired number of
staples.
Inch specifications
Ready to copy.
Staple mode
Staple
Limited number of staple pages.
None
The limit is set in setting mode.
1 staple
Cannot combine staple and
offset stacking.
2 staples
Metric specifications
Ready to copy.
Staple Mode
Staple
None
Limited number of pages to be stapled.
The limitation depends on setting mode.
1 staple
Cannot combine sort function and
staple.
2 staples
* The stapling position will be displayed on the image of the
finished copies that appears in the touch panel, as shown
in the illustration below. Verify the number and position of
the staples before copying. When the combination of the
selected functions does not allow stapling, the staple marks
will appear on the displayed image.
Orientation of
originals
No and
position.
of staples
1 staple
Top left
stapling
1 staple
Top right
stapling
2 staples
Left side
stapling
2 staples
Right side
stapling
2 staples
Right stapling
Stapling
Not possible
Paper size
Set
11x8 / "
1
2
Back Close
Check direction
Check direction of
original top side.
Left top
Back Edge
corner
Paper size
Set
Back Close
Check direction
Check direction of original.
Left top
Back Edge
corner
8-3