Olivetti d-Copia 45 Operation Manual page 155

Default setting
Paper type Sets and then displays the type of paper that is loaded in
(drawer[cassette] No.1 - drawers[cassettes] No.1 through No.5.
No. 5) * The drawer[cassette] No.5 setting will only be
displayed when the optional Side Feeder, which is only
available for 55 cpm copiers, is installed on your
copier.
Custom paper type for Sets whether or not each custom paper type (custom 1 -
2-sided copying custom 8) will be available for use in
2-sided copying.
Auto shut-off time Sets the amount of time that will elapse after copying, or
if no operation is performed, before the auto shut-off
function engages and turns the copier OFF.
* It is recommended that you try to set a longer time
interval before auto shut-off engages if you use the
copier frequently, and to a shorter time if there are long
intervals between use.
Auto preheat time Sets the amount of time between the point that copying
ends and the energy-saving preheat mode engages.
Copy eject location Sets the location for the ejection of finished copies.
* This setting will only be displayed when the optional
Document Finisher or Multi Job Tray is installed on
your copier.
Touch panel sound ON/ Sets whether or not the touch panel will emit a "beep"
OFF sound each time a key is touched.
Silent mode ON/OFF The copier can be switched to a silent mode, which
shortens the length of time that the laser data writing
motor continues to spin after each copy job is finished.
Turn the silent mode ON if the noise of the motor
bothers you in any way.
Section 7 COPIER MANAGEMENT FUNCTIONS
Description Available Factory
settings setting
Plain Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 –
Custom 8
On / Off On
15 – 240 (minutes) 90 (minutes)
1 – 45 (minutes) 15 (minutes)
Tray A Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
On / Off On
On / Off Off
Reference
page
7-24
7-25
7-25
7-26
7-27
7-28
7-29
7-19