Table of Contents
Advertisement
Customize screen layout (Add functions)
Perform the following procedure to add often-used functions and/or
modes, or to change the order of their layout, in order to make the
display more appropriate to the way you use the copier.
1
Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-36.)
Inch specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine
Document
default
Management
Metric specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine
Document
default
Management
2
Select "Customize(Add function)" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Customize(Add function)" screen will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Modify Copy
On / Off
Job Queue Report
On(All copy job)
Display register key
On
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting
Copy default
Default menu
Modify copy
On / Off
Job Queue Report
On(All copy jobs)
Display"Register"key
On
Customize(Main function)
Customize(Add function)
Default setting
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Hard Disk
Management
Print
Form
Close
Setting mode
Up
Down
Change #
Close
Setting mode
Up
Down
Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3
If you want to add functions and/or modes to the "User
choice" tab, touch the " " or the " " cursor key under the list
on the right to select the item you want to add. Then touch
the " " or the " " cursor key under the list on the left to
select in what order you want it to be added in that tab.
Finally, touch the "b" key to add the selected item to the
"User choice" tab.
Inch specifications
Customize(Add function)
Basic
Margin
Border Erase
Combine
None
User choice
None
None
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Customize(Add function)
Basic
Register mode
Erase
Cover
None
Test copy
User choice
None
Form Overlay
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
5
Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Back
Close
Register mode
Addition mode
None
Select paper
Combine
Auto Selection
Batch scanning
Margin
Back
Close
Addition Mode
None
Select paper
Merge
Auto selection
Batch scanning
Margin
7-59
Advertisement
Table of Contents
