Specifying The Sending Time ([Timer Tx]); Timer Tx; Operation Flow - Olivetti d-COLOR MF3800 Manual

4.3

Specifying the sending time ([Timer TX])

4.3 Specifying the sending time ([Timer TX])

Timer TX

Timer TX is a feature that automatically starts sending at a specified time.
Using the Timer TX function to reserve fax transmission during off-peak rate hours early in the morning and
late at night can help to reduce transmission costs. You can reserve up to 16 Fax TX jobs using the Timer TX
function.
Tips
This function cannot be used together with the Polling TX function.
d
Reference
If Timer TX is used in combination with Polling RX, files for polling can be received at a specified time. For
details on how to receive a polling file, refer to page 6-11.

Operation flow

1
Load the original.
2
Tap [Fax].
3
Specify the destination.
% You can specify multiple destinations at the same time.
4
Tap [Application] - [Fax Setting] - [Timer TX], then tap [ON].
5
Using the Keypad, enter the transmission start time, then tap [OK].
% To display the Keypad, tap the input area for the numeral.
6
Press the Start key.
Scanning of the original starts. The fax is automatically sent at the specified time.
Tips
If the machine power is not activated at the start time, fax transmission will not start. The fax transmission
starts just after the machine power is turned on.
d-Color MF 3300/3800
4
4-5