Olivetti d-Copia 45 Operation Manual page 114

Section 5 OTHER CONVENIENT FUNCTIONS
% Selecting the location of copy ejection
If the optional Document Finisher or Multi Job Tray is installed on your
copier, this procedure lets you select the location for the ejection of
finished copies.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Select of Output" key. The "Select of Output" screen will be
displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto Off
Border Select Modify
Erase orig.size Copy
None None Tray A
Select of
Margin/
Page #
Output
Centering
Basic Quality Edit
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
None Auto None
Select size
Erase Mode Modify copy
original
Finisher main tray
None None
Page
Margin/ Select of
Imag.shift numbering Output
Basic Quality Edit
NOTES
• This setting will only be displayed when the optional Document
Finisher or Multi Job Tray is installed on your copier.
• The setting in regard to the location of copy ejection can only be
made in the first step of the job build mode and will apply to all
steps in the copy job.
2 Select the desired location for the ejection of finished copies.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Select of Output
Auto
Tray A
Tray 3
Tray 1 Tray 4
Tray 2 Tray 5
Metric specifications
Ready to Job build.
Set original. Press Start key.
Select of Output
Auto
Tray A Tray 3
Tray 1 Tray 4
Tray 2 Tray 5
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
5-70
Set
End
Insert page
2 sided copy-Left
Print from
Finished page # : 0 Rear page
Set
End
Insert
blank page
2-sided Copy-Left
Print from
Finished page #: 0 Rear page
Set
Back Close
Select proper output tray to avoid
mixing job.
You can confirm output tray with output
management.
Set
Back Close
Select proper output tray to avoid
job mixing.
You can confirm output tray with output
management.