Olivetti d-Copia 45 Operation Manual page 112

Section 5 OTHER CONVENIENT FUNCTIONS
! Manually selecting the size of the originals
This procedure allow you to select the size of the originals manually
using the touch panel.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Select orig. size" ["Select size original"] key. The "Select orig.
size" ["Select size original"] screen will be displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto Off
Border Select Modify
Erase orig.size Copy
None None Tray A
Select of
Margin/
Page #
Output
Centering
Basic Quality Edit
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
None Auto None
Select size
Erase Mode Modify copy
original
Finisher main tray
None None
Margin/ Page Select of
Imag.shift numbering Output
Basic Quality Edit
2 If you want the size of the originals to be detected
automatically, touch the "Auto" key. If you want to select a
standard original size, touch the key that corresponds to the
desired size.
If you want to select the dimensions of the originals manually,
touch the "Input size" key and then set the corresponding
dimensions.
Inch specifications
Ready to copy.
Select original size
8 1 / x14"
Auto 2
Select
11x17" 5 1 / x8 1 /
2
size
Input size 8 / x5 /
8 1 / x11" Cardstock 1 1
2 2
11x8 / "
1
2
Metric specifications
Ready to copy.
Select size original
Auto
Select
size
Input size
5-68
Set
End
Insert page
2 sided copy-Left
Print from
Finished page # : 0 Rear page
Set
End
Insert
blank page
2-sided Copy-Left
Print from
Finished page #: 0 Rear page
Paper size
Set
11x8 1 / "
2
Register Back Close
User regist.
11x15"
5 / x5 / "
1 1
2 2
" A4
8 1 / x8 1 / "
2
2 2
" 11x11"
A4
2
9x9"
Set
Paper size
Back Close
Register
Use regist
100X100mm
150X150mm
200X200mm
120X120mm
Folio
3
Touch the "Close" key. The touch panel will return to the
screen in step 1.
@ Selecting the repeat copy mode
This procedure allow you to select the repeat copy mode so that you
can make any necessary number of additional copies later.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Modify Copy" key. The "Modify Copy" screen will be
displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto Off
Border Select Modify
Erase orig.size Copy
None None Tray A
Select of
Margin/
Page #
Output
Centering
Basic Quality Edit
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
None Auto None
Select size
Erase Mode Modify copy
original
Finisher main tray
None None
Margin/ Page Select of
Imag.shift numbering Output
Basic Quality Edit
NOTES
• To make additional copies with the repeat copy mode, refer to
"(2) Printing out with the repeat copy mode" on page 5-44.
• The setting in regard to whether or not to use the repeat copy
mode can only be made in the first step of the job build mode
and will apply to all steps in the copy job.
2 Touch the "On" key to select the repeat copy mode.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Modify Copy
Off
On
Metric specifications
Ready to Job build.
Set original. Press Start key.
Modify copy
Off
On
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Set
End
Insert page
2 sided copy-Left
Print from
Finished page # : 0 Rear page
Set
End
Insert
blank page
2-sided Copy-Left
Print from
Finished page #: 0 Rear page
Set
Back Close
W h e n s e l e c t [ O n ] , d a t a c a n b e s ave d .
Yo u c a n r e c a l l a n d r e - p r i n t a t a ny t i m e.
A n d yo u c a n s e t t h e p a s swo r d t o s e c u r e
s ave d d o c u m e n t .
Set
Back Close
When select [On], job can be saved.
When the mode is set [On], it can
You can recall and re-print at anytime.
save a job data and reprint it anytime.
You can set a password to secure saved
And you can set that other user are not
document.
able to reprint.