Olivetti d-Copia 45 Operation Manual page 113

# Selecting the margin mode or the centering/image shift mode
This procedure selects the margin mode or the centering/image shift
mode in order to create a margin space or center the copy image.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Margin/Centering" ["Margin/Imag. shift"] key. The "Margin/
Centering" ["Margin/Imag. shift"] screen will be displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto Off
Border Select Modify
Erase orig.size Copy
None None Tray A
Select of
Margin/
Page #
Output
Centering
Basic Quality Edit
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
None Auto None
Select size
Erase Mode Modify copy
original
Finisher main tray
None None
Margin/ Page Select of
Imag.shift numbering Output
Basic Quality Edit
NOTE
The setting in regard to the margin mode or the centering/image shift
mode can only be made in the first step of the job build mode and will
apply to all steps in the copy job.
2 Touch the "Margin" key or the "Centering" ["Imag.shift"] key,
as appropriate.
For more detailed information on these two settings, refer to
the explanation for the margin mode on page 5-6 or the
centering/image shift mode on page 5-8, as appropriate.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Margin/Centering
None
Margin
Centering
Metric specifications
Ready to Job build.
Set original. Press Start key.
Margin/Image shift
None
Margin
Image
shift
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Set
End
Insert page
2 sided copy-Left
Print from
Finished page # : 0 Rear page
Set
End
Insert
blank page
2-sided Copy-Left
Print from
Finished page #: 0 Rear page
Set
Back Close
Reposition image to left/right or
top/bottom, and also center image
on paper.
Set
Back Close
Image can be reduced on left or upper
half of paper.
Blank space can be used for memo.
Section 5 OTHER CONVENIENT FUNCTIONS
$ Selecting the print page numbers mode
This procedure selects the print page numbers mode in order to have
page numbers printed on the corresponding copies.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Page #" ["Page numbering"] key. The "Page #" ["Page
numbering"] screen will be displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto Off
Border Select Modify
Erase orig.size Copy
None None Tray A
Select of
Margin/
Page #
Output
Centering
Basic Quality Edit
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
None Auto None
Select size
Erase Mode Modify copy
original
Finisher main tray
None None
Margin/ Page Select of
Imag.shift numbering Output
Basic Quality Edit
NOTE
The setting in regard to the print page numbers mode can only be
made in the first step of the job build mode and will apply to all steps
in the copy job.
2 Touch the "Page #" ["Page numbering"] key. For more
detailed information on this setting, refer to the explanation
for the print page numbers mode on page 5-16.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Page #
None P.1
-1- 1/n
Metric specifications
Ready to Job build.
Set original. Press Start key.
Page numbering
None P.1
-1- 1/n
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Set
End
Insert page
2 sided copy-Left
Print from
Finished page # : 0 Rear page
Set
End
Insert
blank page
2-sided Copy-Left
Print from
Finished page #: 0 Rear page
Set
Back Close
Page # can be added on bottom of copy.
Set
Back Close
Page # can be added on bottom of copy.
5-69