Copy Default Settings - Olivetti d-Copia 45 Operation Manual

(4) Copy default settings

The following table indicates the copy default settings available in this copier. Change any or all of the settings as desired in order to make the most
effective use of your copier.
Default setting
Exposure mode Selects between auto exposure and manual
exposure as the default copy exposure mode in the
initial mode.
Exposure adjustment Changes the incremental step to be used during
step adjustment of the copy exposure.
Original quality Determines the default setting that will be used for
the image quality in the initial mode.
Custom original size Sets the custom paper sizes (settings No.1 through
(setting No.1 – No.4) No.4) that can be used under the original size
selection mode.
Eco print mode ON/OFF Determines whether the Eco print mode will be the
default setting in the initial mode. In this case, the
amount of toner that is used to make the copies will
be reduced, and images will be printed out relatively
lighter than normal.
Paper selection Sets whether the copier will automatically select the
same size of copy paper as the original once an
original is set (APS: auto paper selection mode), or
whether the drawer[cassette] selected "Default
cassette" setting will be automatically selected.
Paper type (auto paper Sets which types of paper can be selected under the
selection mode) auto paper selection mode.
Section 7 COPIER MANAGEMENT FUNCTIONS
Description Available settings Factory
setting
Manual / Auto Manual
1 step / 0.5 step 1 step
Text+Photo / Text / Text+Photo
Photo
Off / Input size Off
Inch specification -----
Width: 2 – 11
5/8
(inches)
Length: 2 – 17 (inches)
Metric specification
Width: 50 – 297 (mm)
Length: 50 – 432 (mm)
On / Off Off
APS / Default APS
drawer[cassette]
Plain Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 – Custom 8
Reference
page
7-37
7-38
7-39
7-40
7-41
7-42
7-43
7-33