Table of Contents
Advertisement
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the '
10
Press 'next/select' to enter the '
11
Select the appropriate parity and number of stop bits using the
12
Press 'next/select' to confirm the selected parity and number of stop bits.
13
Press 'Program' to leave the main menu.
14
Port type
In order to give the maximum connection flexibility, the printer's serial port
can be set to either DTE (data terminal equipment) or DCE (data
communications equipment). The default is DTE.
Selecting the port type
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the '
10
Press 'next/select' to enter the '
11
Select the appropriate port using the
12
Press 'next/select' to confirm the selected port.
13
Press 'Program' to leave the main menu.
14
The printer's serial interface conforms to the RS-232-C and
Note:
RS-423-C standards. If your computer uses the RS-423-C serial interface,
the port type must be set to DTE.
Installing the printer
' item using the
SERIAL
' item using the
TRANSMISSION
' item using the
FRAMING
' item using the
ONFIGURATION
' item using the
CONNECTIONS
' item using the
SERIAL
' item using the
PROTOCOL
' item using the
PORT
' menu.
CONNECTIONS
or
button.
' menu.
SERIAL
or
' menu.
TRANSMISSION
or
button.
' menu.
FRAMING
or
' menu.
ONFIGURATION
or
' menu.
CONNECTIONS
or
button.
' menu.
SERIAL
or
button.
' menu.
PROTOCOL
or
button.
' menu.
PORT
or
button.
button.
or
button.
button.
button.
19
Advertisement
Table of Contents
