Editing Stamps - Oce 9800 User Manual

Editing stamps

Stamps are pre-defined strings of text. This information may be any sequence
of characters, including date and time. If you select the symbol
current date will be printed. The symbol
want to use a space, select the 'space' button located to the right of the Z
character.
If you have selected date and/or time, the current date and/or time will
Note:
be printed on your output.
Users can select a stamp to print pre-defined information on their output (see
'Stamp unit (optional)' on page 47). Your key operator can define up to 50
stamps. The procedure below explains how to define stamps.
Editing a stamp
Open the 'Stamp' card in the 'Finishing' section.
1
Prints:
Ready to print
0
High cap.
stacker
Stamp
Edit
Layout
Fold
delivery
Select
...................................................................................................................................
Fold
Stamp
[61] Stamp card
Press the 'Stamp' function button to choose 'Select' and then use the
2
higher/lower buttons to choose the stamp you want to change.
Press the 'Stamp' function button again to select 'Edit' (see figure 61).
3
The function button (move right) and
4
used to move the cursor to the desired character.
Press the 'Write character' function button to include the selected character in
5
your stamp.
If you want to delete the last character entered in the stamp, press the 'Erase
6
character' function button.
Edit the stamp as required.
7
When finished, exit key operator mode.
8
Key operator
................ ................
Machine Program
1
Write Erase
character character
function button (move left) can be
, the
is used to print the time. If you
................
................
Copy
Finishing
71