Oce 9800 User Manual page 57

Adjusting the side guides of the belts
Loosen the fastening screws (see figure 49).
1
[49] Adjusting the side guides of the belts
Adjust the plate in accordance with the width of the fold package.
2
Tighten the fastening screws.
3
If you change the folding width and/or the folding length, you must
Note:
adjust the punching unit.
Adjusting the punching unit
Open the door at the front of the high capacity output unit.
1
Turn the black knob to adjust the folding width (see figure 50). Refer to the
2
sticker inside the unit.
[50] Knob for adjusting the folding width in the punch unit
Loosen the fastening screw and position the plate in accordance with the
3
folding length (see figure 51).
Default printer settings 57