Defining Clock Settings; Setting The Current Time And Date - Oce 9800 User Manual

Defining clock settings
The Océ 9800 Printer has an internal clock which must be properly set if it is
to be used for stamping purposes or to automatically turn the Océ 9800 Printer
on or off. The way in which the current time and date is displayed can be
adapted to local conventions by your Océ service engineer.
The reset time is the time the system will wait before it returns to the default
settings. This parameter can be modified.
The 'Timers' card in the 'Machine' section allows you to define the following
time-related settings.

Setting the current time and date

To ensure correct functioning of the time switch, you must set the current time
and date. The way in which the time and date are displayed can be adapted to
local conventions.
Selecting the required time and/or date
Access key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Press the 'Time and Date' function button (see figure 55).
3
Prints: Ready to print
0
Timers
On
08 00.
Zoom
Off after
General
4 hrs.
......................................................................................................................................
On/Off-timer
Controller
[55] Time and date notation
You can now adjust the day. Press the 'Time and Date' function button again
4
to enter the month, then press the 'Time and Date' function button again to
enter the year.
64 Océ 9800 Printer User Manual
................
................
Program
Machine
From:
Monday
Up to:
Friday 2 min
Reset
Work days
time
................ ................
Finishing Copy
Time:
12 00
Date:
01 01 95
Time and
Date