General Settings - Oce 9800 User Manual

larger-sized copy material is unavailable, the printer will select a roll with
smaller-sized copy media. In this case, a new zoom factor will be calculated
to prevent information loss.
Defining default Auto roll
Open the 'Automatics' card in the 'Language' section.
1
Press the 'Auto roll' function button.
2
Use the scroll buttons to define the new 'Auto roll' mode.
3
When finished, exit system administrator mode.
4

General settings

This card can be used to define the system settings 'Print time-out' and
'Automatic Language Sensing (ALS)'. Each parameter is explained briefly
below.
Print time-out
print data are received. When the timer reaches the selected limit, the system
assumes that the end of file has been reached and the data stream associated
with the current print job will be considered terminated.
Defining print time-out
Open the 'General' card in the 'Language' section (see figure 70).
1
Prints:
Ready to print
0
General
Automatics
Pen menu
15 sec
...................................................................................................................................
Formats
Print
time-out
[70] General card
Press the 'Print time-out' function button.
2
Use the higher/lower buttons or the numeric buttons to define the new print
3
time-out in seconds.
When finished, exit system administrator mode.
4
84 Océ 9800 Printer User Manual
The print time-out is a timer. It is started as soon as no more
................
Machine
................ ................
................
Program Connect
Language
Calcomp
on
ALS
formats