Editing; Auto Shift - Oce 9800 User Manual

Editing

The following default print settings are usually overruled by settings that
Note:
are sent to the printer along with the print job.
The Océ 9800 is equipped with the editing functions 'Auto shift', Mirror and
'Shift'. Only one edit function at a time can be selected.
Only 'Shift', 'Mirror' and 'Autoshift' can be used. 'Stretch' and
Note:
'Erase' cannot be used, and should be ignored.

Auto shift

The Auto shift function allows you to automatically move your image to one
side of the page.
The Auto shift function supports these shift options:
Upper left
[34] Auto shift options with standard cut option active
'Standard cut' must be enabled in order to generate copies similar to the
Note:
ones shown in the example above (illustration 34). If Synchro cut is enabled,
use of Auto shift will result in the following output
Upper left
[35] Auto shift options with synchro cut option active
'Shifting the image' on page 45 explains how to define the exact position of
your image on the page.
Default printer settings
Upper right Centre
Upper right Centre
Lower left Lower right
Lower left Lower right
43