Reset functions
The system administrator can make use of the following functions in the
'Machine' section:
Restore factory default settings
Reset controller
Restoring controller to factory default settings
The system administrator can use the Reset configuration function to undo all
changes which may have been made to the Océ 9800 controller settings.
Restoring factory default settings
Open the 'Controller' card in the 'Machine' section (see figure 71).
1
Prints:
Ready to print
0
General
......................................................................................................................................
Controller
Test
print
[71] Controller card
Press the 'Reset config.' button.
2
Press the Start button to confirm.
3
All changes will be undone and the system will be restored to its default status.
When finished, exit system administrator mode.
4
Resetting controller
If a controller error cannot be solved by resetting an error message, you can
reset the entire controller without turning the printer off.
86
Océ 9800 Printer User Manual
................
................
Machine
Program
Print
Folding
Reset
length
settings
config.
...............
................
Language
Connect
Reset
Reset
Reset
controller
error