Defining Default Language Settings; Language (Data Format) - Oce 9800 User Manual

Defining default language settings
During installation, your Océ service engineer will define the appropriate
language settings for your particular system. If these settings change over time,
you can use system administrator mode to define new system-wide defaults.

Language (data format)

The following default print settings are usually overruled by settings that
Note:
are sent along with the print job.
The Océ 9800 accepts print files in various data formats (languages). You can
change the settings for Calcomp, HP-GL, HP-GL/2, and ASCII.
Setting the default language format
Open the 'Formats' card in the 'Language' section (see figure 66).
1
Press the 'Select data format' function button to select the required language.
2
The ASCII and Calcomp settings are distributed over two windows.
Note:
Press the 'Select data format' button again to open the second window.
Define the appropriate settings.
3
When finished, exit system administrator mode.
4
Prints:
Ready to print
0
General
Automatics
Pen menu
Calcomp
......................................................................................................................................
Formats
Select
data format
[66] Selecting the required data format: the first window of Calcomp settings
80 Océ 9800 Printer User Manual
................ ................
Machine Program
Step size: Synchro code:
400 2
Origin: Double synchro:
no
Lower right
Folding Step &
length origin Synchro
................
...............
Connect
Language
3
End of
Checksum message
width