Folder (Optional) - Oce 9800 User Manual

Folder (optional)

The following default print settings are usually overruled by settings that
Note:
are sent to the printer along with the print job.
If a folder is installed, you may choose to have your copies folded. The copies
are folded according to the selected folding width and length in combination
with a folding method. The folding methods are Standard, Ericson and Afnor,
with or without a binding edge.
If you select 'Portrait' as the Folding method, make sure that all digital
originals are in portrait orientation (see 'Auto rotate' on page 82). Only
portrait-oriented drawings can be folded with the legend on top. If 'Automatic'
is selected, the machine measures the length of the digital original to obtain a
good fold package, depending on the roll width.
Polyester film and vellum cannot be folded. If you try to do so, a warning will
appear in the display.
Long copies can be folded in lengths of up to 6 m (approx. 201). Copies
Note:
between 2.5 m and 6 m long (approx. 8' and 20' respectively), however, can
only be processed by the first fold unit, and these copies must be removed from
the folder. This is indicated on the display.
You can also select a folding method, and, if required, a folding length, folding
width, binding edge and, if configured, punching (see figure 46). When
changing the folding width on machines with a high capacity output unit with
punch unit, you must also adjust the side guides in the high capacity output unit
(see 'High capacity output unit with punch unit (optional)' on page 55).
Default printer settings 53