Reading The Display - Oce 9800 User Manual

Reading the display

The display on the printer shows the following components:
Prints:
Ready to print
3
memory indicator
Time:
0: 11
Jobs:
7
[2] Components of the printer display
By pressing the button located under 'Print' in the lower right corner of the
display, you can enable or disable plotting on the Océ 9800 printer.
If 'Print' is selected (black), the system will accept and print incoming jobs.
The jobs will be handled in incoming order. If the controller is currently
processing a print job, the display will show 'Processing'. If 'Print' is not
selected (white), the printing process is stopped after the current job has been
finished. However, the system will continue to accept incoming print jobs as
long as enough memory is available. For more information about stopping
print jobs, see 'Stopping a print job' on page 22.
The memory indicator shows the amount of memory that is currently in use,
along with the number of jobs in memory and the time it will take to print these
jobs. 'Prints', in the upper left corner of the display, indicates the number of
(sets of) prints that remain to be printed for the current job.
The roll indicator shows the kind of copy media and the format that is currently
loaded on the different rolls in the printer.
The message area above the print button area displays the current activity of
the controller.
10 Océ 9800 Printer User Manual
................ ................
Machine Program
Roll 1
.....................
Processing. A3 Bond
Roll 3
A1 Bond
Print
................ ................
Finishing Copy
Roll 2
A2 Bond
Roll 4
A0 Bond