Editing A Job In The Mailbox Or Memory - Oce CPS800 User Manual

Editing a Job in the Mailbox or Memory

Editing a Job in the Mailbox or Memory
Introduction
You can change the job settings of a job in the mailbox or memory. In the 'Workflow'
menu of the job editor you can define that you want to save the changes of the job to
the mailbox/memory (the system also stores the changes in the mailbox/memory if
'Save settings' in the 'System manager' is selected).
The job in the job queue is a copy of the mailbox/memory job.
You can use the job in the mailbox/memory as often as required. You can delete the
job from the mailbox/memory if the job is no longer required.
To edit a job in the mailbox/memory, select the job and press 'Edit...'.
After that a new job is generated and appears in the job queue. At the same time the
job editor opens with the available job settings. The values of the settings are defined
in the mailbox/memory job.
You can change the following settings for the job in the mailbox/memory:
The number of prints.
All the 'Print' settings in the 'Output', 'Sheet', 'Layout' and 'Image' menus.
The 'Workflow' settings 'Save settings', 'Check first set' or 'Set account number'.
The number of prints, 'Check first set' and account number are not saved in the
mailbox/memory if 'Save settings' is selected.
Note: 'Edit...' is only available if you select one mailbox/memory job at a time.
78 Chapter 3 Print Jobs on the Océ CPS800®