Oce 9800 User Manual page 16

type of copy media that is currently loaded in the printer, and resetting the
counter.
Default settings can be overruled by job-specific printer settings that are sent
along with the print job. Examples of default settings are: copy media to be
used, deposit mode, folding method and stamp selection.
Key operator button
system administrator mode. As this functionality is restricted to a dedicated
user, a different PIN code is required for each mode.
Section and function buttons
the machine, program, finishing and copy sections. In a section, you can use
the function buttons to select a specific function; the function name associated
with each button is shown in the display.
As you can see in illustration 5 on page 15, the display is surrounded by
buttons. Their functions vary, depending on the display level in use.
The top four buttons (section buttons) provide access to the sections (main
menus). Each high-level menu item contains several functions ('cards'). The
left button, or card selection button, provides access to the cards. The function
buttons allow you to select functions or sub-functions in a card, after which
you can use the higher/lower buttons, or the numeric buttons to define numeric
settings.
When operating the buttons of the Océ 9800 display, keep this sequence in
mind: start with one of the section buttons and work counter-clockwise to the
card selection and function buttons. Finally, use the triangular higher/lower
buttons to make a selection.
KEY
Prints:
3
Time:
0:11
Jobs:
7
card (middle menu) level
[6] When using the Océ 9800 menu, work counter-clockwise
16 Océ 9800 Printer User Manual
By pressing this button you can enter the key operator or
By means of the section buttons, you can access
section (top- menu) level
............ ............
Ready to print
Machine Program
Roll 1
............
A3 Bond
Processing.
Roll 3
A1 Bond
Print
function (bottom menu) level
............ ...........
Finishing Copy
Roll 2
A2 Bond
function
Roll 4
value
A0 Bond
level