Defining Automatic Roll Change - Oce 9800 User Manual

Defining automatic roll change
Enabling 'Automatic roll change' will cause the printer to switch to another
roll loaded with the same copy material and format when the first roll is used
up during printing. Disabling 'Automatic roll change' causes the machine to
stop printing once the selected roll is empty and to ask you to load a new roll.
The machine is unable to detect the type of media loaded on the copy
Note:
material roles. This should be specified as described in 'Defining the type of
media' on page 93.
Turning 'Automatic roll change' on and off
Open the 'Copy size' card in the 'copy' section.
1
Press the 'Automatic roll change' function button to switch the automatic roll
2
change function on or off (see figure 63).
Prints:
Ready to print
0
Image
Copy
mediamedia
Copy
Automatic
size
roll change
[63] Turning 'Automatic roll change' on and off
When finished, exit key operator mode.
3
Key operator
................
Machine
A4 >> A2
A3 >>
A2
210 mm
A2
A2 >>
A2
A1 >> Standard cut
A2
A0 >> Synchro cut
Copy
Auto format
selection length
selection
................
................
................
Program Finishing
Copy
73