Oce 9800 User Manual page 92

[74] Removing the core from the roll holder
You can place the new roll in the groove above the media roll
Note:
compartment on the printer.
Press the locking mechanism down and, from the left, slide the roll holder into
5
the core of the new roll.
Position the roll between the appropriate format indicators and release the
6
locking mechanism (see figure 75).
[75] Placing a new roll on the holder
Use both hands to place the holder in the media roll compartment. Position the
7
left-hand side of the holder into its notch first, and then the right-hand side (see
figure 76).
If the new roll does not have a straight leading edge you can cut it manually.
8
92 Océ 9800 Printer User Manual