Oce 9800 User Manual page 25

copies can be
If a High Capacity Stacker is installed in your configuration,
ejected at the rear of the printer into one of the six stacker bins. Each bin can
stack up to 200 unfolded copies. Copies which are longer than 122 cm (48")
are collected under the stacker unit. Copies on polyester film are always
delivered into the lower bin (bin 6). The upper bin (bin 1) cannot be moved.
Bins 2 through 6 can be pulled out (opened) 30 cm (approx. 12") to facilitate
emptying.
The 'High Capacity Stacker' can be can be used in combination with the
'Lower Container Unit' or the 'Folder', with either of these connected to the
lower delivery output (see 'Using the lower delivery output' on page 27).
[20] Emptying the High Capacity Stacker
If the indicator light next to a bin remains on
'Bin in use' indicator
96020901-005
continuously, the bin is in use for copy delivery and the bin should not be
opened.
If the indicator light next to a bin flashes slowly (1Hz), the
'Bin full' indicator
bin is full. After emptying the bin completely, the light will stop flashing.
If the indicator light is flashing rapidly (2Hz) and the
'Close bin' indicator
alarm is buzzing, the bin should be closed immediately. If the bin is not closed
in time, an error will occur and the machine will stop.
Using the Océ 9800 Printer 25