Oce 9800 User Manual page 103

[90] Crank.
If the paper keeps coming, it is not cut and it must be manually cut.
7
Open the pre-heater section by pressing handle 1 down (see figure 91).
8
Pull both green catches (2) towards you and release handle 1 (see figure 91).
9
Pull the green bar (3) towards you (see figure 91).
10
2
[91] Opening the pre-heater section
Cut the paper and turn the crank clockwise to deliver the jammed paper.
11
Refer to 'Clearing a paper jam in the roll feed section' on page 104.
12
Remove the crank and return it to its original position.
13
Close as follows:
Push bar 3 to the rear.
1
Press handle 1 downwards.
2
Press both green catches (2) to the rear.
3
Close the bar of the fuser section.
4
Close the lower cover of the output unit.
5
Unlock the green bar and close the top cover.
6
Problem solving
2
3
1
103