Oce 9800 User Manual page 69

Prints:
Ready to print
0
Normal
Exposure
Synchro cut
copydelivery:belt1
Zoom % (auto)
Zoom: % (auto)
Roll: (auto)
Roll: (auto)
Sort by page
Sort by set
Copies: 1
Copies: 3
Default
1
settings
[59] Storing program settings
Press the button of the appropriate program (1-5) to store the current settings
4
as a group of default printer settings in the selected program memory.
You will be asked to confirm the store procedure after the data has
Note:
been entered in the program.
When finished, exit key operator mode.
5
Erasing settings under a program button
Press the 'Program' section button.
1
Select 'Erase' (see figure 60).
2
Prints:
Ready to print
0
Normal
Exposure
Synchro cut
copydelivery:belt1
Zoom % (auto)
Zoom: % (auto)
Roll: (auto)
Roll: (auto)
Sort by page
Sort by set
Copies: 1
Copies: 3
Default
1
settings
[60] Erasing program settings
Press the button of the appropriate program (1-5) to erase or overwrite the
3
group of default printer settings.
You will be asked to confirm the erase/overwrite procedure after the
Note:
data has been entered in the program.
When finished, exit key operator mode.
4
Changing the Océ 9800 standard 'Default' settings
Define the settings which you wish to use in place of the standard default
1
settings.
Press the 'Program' section button.
2
Key operator
................
................ ................
Machine
Program
Program
Store
2
3
................
................ ................
Machine
Program
Program
Erase
Margin
2
3
(mm)
................ ................
Finishing Copy
Margin
4
5
(mm)
................ ................
Finishing Copy
4
5
69