High Capacity Output Unit With Punch Unit (Optional) - Oce 9800 User Manual

[47] Receiving tray of the folder

High capacity output unit with punch unit (optional)

The optional high capacity output unit is equipped with either one (standard)
or two belts that offer a larger capacity and more flexibility. This output unit
delivers copies on belt 1 or belt 2. For maximum capacity, the two belts can be
linked so that the system automatically switches to the empty belt when the
first one is full. The copies are delivered offset stacked. You can adjust the side
guides of the belts, depending on the width of the fold package. The amount of
copy output to be delivered on the belts can be adjusted by your Océ service
technician.
An optional punching unit can be installed in the high capacity output unit, to
perforate your copies. Four-hole punching is standard. Your Océ service
technician can change the system to two-hole punching.
If you want to use a different folding length and folding width, you must
Note:
also adapt the folding length and folding width in the punching unit (see
'Adjusting the punching unit' on page 57).
When selecting the default settings for the high capacity output unit, you have
the following options:
stack: the copies will be deposited in the output tray.
belt 1: the copies will be delivered on belt 1. If this belt is full, an error
message will be displayed.
Default printer settings
Receiving tray
55