Oce 9800 User Manual page 23

Prints:
Ready to print
0
Interrupt mode active
General
......................................................................................................................................
Interrupt
Access to
Controller
job
Page
.
[17] Interrupting a job
Wait until the message 'Interrupt mode active' appears.
4
Return to the main menu, and enable printing by pressing the 'Print' function
5
button (see figure 18).
Prints:
Ready to print
0
Time:
0: 11
Jobs:
7
[18] Enable printing
Send the urgent print job, using your printer driver.
6
After the urgent job has finished, you can:
7
Start another urgent job, or,
Open the 'General' card in the 'Machine' section and press the 'Interrupt job'
8
function button again, to continue with the job that was being processed at the
moment of interruption.
Using the Océ 9800 Printer
................
Machine
Access to
Special
................ ................
Machine Program
Roll 1
.....................
A3 Paper
Processing.
Roll 3
A1 Paper
Print
................ ................ ................
Program Finishing Copy
Reset
counter
................ ................
Finishing Copy
Roll 2
A2 Paper
Roll 4
A0 Paper
55
23