Oce 9800 User Manual page 93

[76] Placing the roll into the media roll compartment
Press the appropriate button inside the media roll compartment and feed the
9
copy material between the input guide plates as indicated by the arrow (see
figure 77). The media will automatically be fed into the machine.
[77] Button for feeding the copy material
Close the media roll compartment. The media will be cut automatically. The
10
size of the media is automatically indicated on the operating panel.
If you have loaded a new type of copy material, you will also need to define
the type of media which has been loaded.
Defining the type of media
Open the 'Copy media' card in the 'Copy' section.
1
Press the appropriate function button, either Roll 1, 2, 3 or 4, to enter the type
2
of copy media (see figure 78).
Maintenance 93