Print Controller Errors; Other Problems (Call Océ Service) - Oce 9800 User Manual

Print controller errors

If a print controller error occurs, first try to reset the error as described in
'Resetting errors' on page 33. If this option does not work, try to reset the
entire controller as described in 'Resetting controller' on page 86. Always
write down any error codes displayed. Error codes are explained in 'Océ 9800
controller error codes' on page 127. Also check whether 'Print' is selected on
the main display (see 'Reading the display' on page 10), and whether the
'Stop' button has been used (see 'Stopping a print job' on page 22).
Other problems (call Océ service)
Should you encounter a problem that you cannot solve, call the Océ service
organisation, then turn the system off using the main switch, and leave the
system as it is.
Problem solving 117