Lower Container Unit (Optional) - Oce 9800 User Manual

Lower Container unit (optional)

The following default print settings are usually overruled by settings that
Note:
are sent along with the print job.
You can use the 'Delivery' menu to select which output is to be used for
delivering copies: the upper delivery output or the lower delivery output.
If a folding unit is installed, the lower delivery output will be used for
Note:
folded copies. The 'Delivery' menu will not be present.
The following options can be selected in the 'Delivery' menu:
Upper output
optional High Capacity Stacker.
Lower output
using an optional container for long copies.
Generally, the upper delivery is used, except in cases in which the
Automatic
copy is too long to be collected in the single receiving tray or the High
Capacity Stacker, in which case the lower delivery output is used.
Selecting default settings for the Lower Container unit
Open the 'Delivery' card in the 'Finishing' section.
1
Press the 'Delivery' button to select the required output (see figure 45).
2
Prints:
Ready to print
0
Delivery
High cap.
stacker
Stamp
[45] Default settings for Lower Container unit
52 Océ 9800 Printer User Manual
The copies are delivered to a single receiving tray or to the
The copies can be collected under the lower delivery output,
................
Machine
Folding
length
................ ................
................
Program Copy
Finishing
Automatic
Lower output
Upper output
Delivery