Oce 9800 User Manual page 36

Accounting parameter reference
polYesterPrints
PaperClicks
tranSparentClicks
polYesterClicks
TotalFolded
TotalpUnched
TotalStamped
TotalEdited
TotalenlarGed
TotalreduCed
ScanjobResolution
ScanjobFileformat
ScanjobWidth
ScanjobHeight
Parameters that are not used by the Océ 9800 configuration are set to 0.
Note:
The following table contains the communications parameters applicable to
your scanner's RS232 port::
Accounting communication RS232 parameters
baudrate
handshake
parity
databits
stopbits
[30] Accounting data communication parameters
Clicks can be registered in m, m
machine configuration. Your Océ service engineer can provide you with the
necessary configuration information. You must divide the number of clicks by
1000 to get the real number of m, m
For instance, the PaperClicks value for a particular account is 1730
(PC=1730). This is 1730 x 0.001 = 1.73 clicks of output media, for example
2
1.73 m .
You can specify a numeric user and account identification for each job to be
logged. If no user ID or account ID have been specified, 0 will be sent to the
output port as the default for user ID, and 0 will be sent to the output port as
the default for account ID.
36 Océ 9800 Printer User Manual
<num> number of polyester prints
<num> paper media clicks used
<num> transparent media clicks used
<num> polyester media clicks used
<num> number of folded prints
<num> number of punched prints
<num> number of stamped prints
<num> number of edited (framed) prints
<num> number of enlarged prints
<num> number of reduced prints
<num> Not used (0)
<num> Not used (0)
<num> Not used (0)
<num> Not used (0)
9600
off
none
8
1
2 2
, ft, or ft . This depends on your particular
2 2
, ft, or ft .