Introduction - Oce 9800 User Manual

Introduction

Problems that may occur when using the Océ 9800:
Paper jams, see page 99.
Problems which can be solved by following the instructions on the display.
Other problems (Call Océ service), see page 117.
When an error occurs, the display provides information about
what the problem is
where it occurred
how to solve it
Copy media is normally transported through the system without any problems.
Occasionally, however, paper may get jammed in the machine. If this happens,
a flashing cover or door will be displayed on the graphic display, indicating the
section of the printer in which the jam occurred.
Prints:
Check machine
0
Open roll unit and doors
Remove copy media
Close roll unit and doors
[82] Example of an error message
Stickers on certain parts of the system indicate which green handles, green
knobs, green bars and covers, etc. need to be lifted, pressed or opened to
remove any jammed copy material.
The display guides you through a sequence of steps to solve the problem. If a
jam occurs in more than one location, the display will continue to instruct you
until all jammed copy material has been removed.
Once the error has been cleared, the display will give you instructions on how
to continue the job in such a way that all copies are correctly produced.
98 Océ 9800 Printer User Manual