Removal Of Nicad Battery - Oce 9800 User Manual

Removal of NiCad battery

This machine is equipped with a nickel-cadmium battery containing
substances which could pollute the environment if improperly handled. After
the battery is removed from the machine, it should be disposed of in an
environmentally safe manner and in conformance with local laws and
regulations.
If you have an Océ maintenance contract, Océ service personnel will remove
the battery and properly dispose of it, if required. If you do not have a
maintenance contract with Océ, battery removal should be carried out as
follows:
Removing the NiCad battery from the printer
Océ accepts no liability for any damages resulting from removal
Attention:
of the battery by persons other than Océ service personnel.
Before removing the battery, turn off the machine and disconnect the power
1
supply.
Remove the cover at the left-hand side (see figure 119).
2
[119] Cover of the main engine
Loosen all of the cpu-io board connectors.
3
Loosen the screws of the printed circuit board assembly.
4
Remove the print board.
5
Remove the blue plastic holder (containing the battery) from the printed circuit
6
board.
135