Oce 9800 User Manual page 50

Bin selection method
Continuous
The printer will switch to the next bin to deliver all copies. If this bin is full,
the next bin will be used (bin 6 will be followed by bin 1). This process will
continue until all bins are full, at which time printing will stop.
Per Job
The printer will switch to the next bin to deliver all copies within the first job.
Copies of the following job will be delivered at the next bin (bin 6 will be
followed by bin 1). This process will continue until the next bin is completely
full (regardless of the contents of other bins), at which time printing will
stop.
If a job does not fit into a single bin, the machine will automatically
Note:
begin delivering copies to the next bin in order to finish the job.
A single job may contain several sets, as defined by the printer driver.
Note:
Per Set
The printer will switch to the next bin to deliver all copies within the first set.
Copies of the following set will be delivered at the next bin (bin 6 will be
followed by bin 1). This process will continue until the next bin is completely
full (regardless of the contents of other bins), at which time printing will
stop.
If a set does not fit into a single bin, the machine will automatically
Note:
begin delivering copies to the next bin in order to finish the set.
Bin number
All copies are delivered into the specified bin. This process will continue
until the specified bin is full (regardless of whether another bin is empty), at
which time printing will stop.
To prevent the printer from stopping, you can empty bins that are not in
Note:
use without interrupting the print process. This is not possible if you have
selected 'Bin number'.
If you have selected 'Per Job' or 'Per Set', we recommend that you
Note:
empty any bins which are not in use in order to prevent the printer from
delivering a new job or set in a bin which contains other output.
Selecting settings for the High Capacity Stacker
Open the 'High cap. stacker' card in the 'Finishing' section.
1
If required, press the 'Offset stack' button to select or deselect this option.
2
Select the required bin selection method by pressing the 'Bin selection' button
3
(see figure 44 on page 51).
50 Océ 9800 Printer User Manual
You can select one of the following options: