Graphical User Interface Display - Oce Arizona 250 GT User Manual

Graphical User Interface Display

Introduction
The Arizona 250 GT Graphical User Interface (UI) is displayed on the LCD flat
panel monitor that is part of the Operator Control Station. The interface has four
main working modules that are accessed by tabs located at the bottom of the display.
Click on these tabs with the mouse to access the modules. Print Job Control is the
default module displayed when the printer is switched on.
The display is divided into functional and status areas. The functional areas supports
all user input necessary to operate, maintain and service the printer. The status areas
are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device. For operations that require operator input, the
mouse is used to select alphanumeric characters from a virtual keypad or keyboard
displayed on the interface LCD panel.
Illustration
[32]
[32] User Interface Tabs
User Interface Module Tabs
[16]
[16] Interface Modules
Component
Print Job
Control
Printer Setup
Special Prints
Printer Upgrade Provides access to the latest version of the User Interface soft-
Function
Provides management of all aspects of working with print jobs
and also controls many features of the printer.
Displays information about network connection settings, sets
how units are displayed, set the language preference, set the date
and time, and sets image quality.
Provides access to the special adjustment prints, Quality Con-
trol Reference print image and the Nozzle Check print.
ware and firmware.
Graphical User Interface Display
45