Setting Station On/Off Options - Samsung OfficeServ 7200 User Instructions

OfficeServ 7200
TECHNICAL MANUAL

1.12 SETTING STATION ON/OFF OPTIONS

The OfficeServ 7200 allows the system administrator to set any of the keyset features
listed below.
FEATURES
AUTO HOLD
00
01 AUTO TIMER
02 HEADSET USE
03 HOT KEYPAD
04 KEY TONE
05 PAGE REJOIN
06 RING PREF.
07 NOT FOR USA
08 AUTO CAMP-ON
09 NOT FOR USA
10 AME PASSCODE
11 DISP SPD NAME
DESCRIPTION
Automatically places an existing C.O. call on
hold if a CALL button, trunk key or trunk route
key is pressed during that call.
Automatically starts the stopwatch timer
during a C.O. call.
When ON, this feature disables the
hookswitch allowing a headset user to answer
all calls by pressing the ANS/RLS button.
When ON, this feature allows the user to dial
directory numbers without having to first lift
the handset or press the SPEAKER button.
Allows the user to hear a slight tone when
pressing buttons on keyset.
Allows the user to hear the latter part of page
announcements if keyset becomes free during
a page.
When OFF, requires the user to press the fast
flashing button to answer a ringing call after
lifting the handset.
This field is reserved and can not be used for
U.S. software.
Keyset users can allow intercom calls to
camp-on to other keysets without having to
press a CAMP-ON key.
If this option is set to YES, station users who
have AME set must enter their station
password to listen to messages being left.
If this option is set to ON the user will have the
name associated with the speed dial number
shown in the display after the number has
been dialed.
1.16
Table of Contents
Home Page
USER INSTRUCTIONS
PART 1 MAY 2009