Asus DS300j G2 Series User Manual page 99

D D a
eletInG a ISk rray
Caution
If you delete a disk array, you also delete any logical drives that belong to it, along
with the data in those logical drives. Back up any important data before deleting a
disk array.
This action requires Administrator or Super User privileges.
To delete a disk array:
1. Click the Storage tab.
2. Click the Disk Array icon.
3. Click the disk array you want, then click the Delete button.
4. In the Confirmation box, type the word "
l D a
ocatInG a ISk rray
This feature causes the drive carrier LEDs to flash for one minute to assist you in locating the physical drives
that make up this disk array.
To locate a disk array:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Click the disk array you want, then click the Locate button.
The drive carrier status LEDs for the array flash for one minute.
Figure 4 - 6: Drive carrier status LED
93
" in the field provided and click the Confirm button.
confirm
Drive Status LED
m D a S
akInG ISk rray ettInGS
To make disk array settings:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Click the disk array you want, then click the Settings button.
4. Make settings changes as required:
• Enter , change or delete the alias in the Alias field
Maximum of 32 characters; letters, numbers, space between characters, and underline.
• Media Patrol – Check to enable, uncheck to disable on this array.
• PDM – Check to enable, uncheck to disable on this array.
• Power Management – Check to enable, uncheck to disable on this array.
5. Click the Save button.
Notes
You can also enable or disable Media Patrol for the entire RAID system. See Making Media
Patrol Settings.
HDD Power Saving must be enabled on the RAID controller for the Power Management
settings to be effective. See Making Controller Settings.
Power Management functions are limited to the features your HDDs actually support.
DS300f G2 Series User Manual