Asu Ds300F G2 I Beeping - Asus DS300j G2 Series User Manual

C 8: t
hapter roubleshootInG
This chapter contains the following topics:
• ASUS DS300f G2 is Beeping (below)
• LEDs Display Amber or Red (page 202)
• CLU Reports a Problem (page 206)
• ASUS Storage Management Reports a Problem (page 208)
• USB Support Reports a Problem (page 209)
• "Enclosure Problems" on page 209
• "RAID Controller Problems" on page 211
• "Disk Array and Logical Drive Problems" on page 213
• "Physical Drive Problems" on page 213
• "Connection Problems" on page 216
• "Power Cycling the Subsystem" on page 218
• "Event Notification Response" on page 218
201
asus ds300 G2
f Is
ASUS DS300f G2's alarm has five different patterns.
When you first power-up the ASUS DS300f G2, it beeps twice to show normal operation.
The audible alarm sounds at other times to inform you that the ASUS DS300f G2 needs attention. But the alarm
does not specify the condition.
When the alarm sounds:
• Check the front and back of ASUS DS300f G2 enclosure for red or amber LEDs.
• If email notification is enabled, check for new messages.
• Check for yellow ! red X icons.
• Check the event log.
See "Viewing Runtime Events" on page 206 and "Viewing NVRAM Events" on page 207.
When a continuous tone sounds, there are multiple alarm patterns sounding at the same time.
S b
IlencInG the uzzer
Caution
This action disables the buzzer for all events.
To silence the buzzer:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Buzzer and click the Settings button.
4. Uncheck the Enable Buzzer box.
5. Click the Save button.
DS300f G2 Series User Manual
b
eepInG