Buzzer - Asus DS300j G2 Series User Manual

r aSuS DS300 G2 – SSh c
eStartInG f
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Shutdown or Restart and press Enter .
3. Highlight Option and press the spacebar to display Restart .
4. Highlight Submit and press Enter .
A warning message appears.
5. Press Y to continue.
6. Close your SSH session.
7. Wait about two minutes.
8. Re-establish your SSH connection to the ASUS DS300f G2 CLU.
See Making a SSH Connection.
If you cannot re-establish a connection, wait 30 seconds and try again.
r aSuS DS300 G2 – S
eStartInG f
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Shutdown or Restart and press Enter .
3. Highlight Option and press the spacebar to display Restart .
4. Highlight Submit and press Enter .
A warning message appears.
5. Press Y to continue.
The screen displays shutdown and startup functions.
6. When the Login: prompt appears, log into the CLU again.
171
onnectIon
c
erIal onnectIon
b
uzzer
m b S
akInG uzzer ettInGS
The buzzer sounds to inform you that the ASUS DS300f G2 needs attention. See "ASUS DS300f G2 is Beeping"
on page <?> for more information.
To make buzzer settings:
1. From the Main Menu, highlight Buzzer and press Enter .
A list of Controllers appears with the current buzzer setting and status.
2. Highlight the Controller whose buzzer you want to set and press Enter .
3. Highlight Enabled and press the spacebar to toggle between Yes and No .
4. Press Control-A to save your settings.
S b
IlencInG the uzzer
Caution
This action disables the buzzer for all events.
To silence the buzzer, follow the procedure above for disabling the buzzer.
DS300f G2 Series User Manual