Asus DS300j G2 Series User Manual page 29

fc sAn nsPf M P
AnAgeMent Ath
To establish the management path:
1. Connect an Ethernet cable between the Management port on each RAID
controller and the network switch.
See "Figure 2 - 14: FC SAN NSPF management connections"
2. Connect an Ethernet cable between the network port on each host PC or
server and the network switch.
If you have multiple ASUS DS300f G2 subsystems, repeat steps 1 and 2
as required.
Jbod e
xPAnsion
JBOD connections are the same for all FC SAN and DAS configurations.
See"Figure 2 - 12: ASUS DS300f G2 with FC JBOD expansion connections"
23
The ASUS DS300f G2 subsystem is shown with SFP transceivers installed.
Figure 2 - 14: FC SAN NSPF management connections
DS300f G2 Series User Manual